Giant magnetoresistance (GMR) behavior of electrodeposited NiFe/Cu multilayers: Dependence of non-magnetic and magnetic layer thicknesses
No Thumbnail Available
Date
2017-12-15
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Abstract
Giant magnetoresistance (GMR) behavior in electrodeposited NiFe/Cu multilayers was investigated as a function of non-magnetic (Cu) and ferromagnetic (NiFe) layer thicknesses, respectively. Prior to the GMR analysis, structural and magnetic analyses of the multilayers were also studied. The elemental analysis of the multilayers indicated that the Cu and Ni content in the multilayers increase with increasing Cu and NiFe layer thickness, respectively. The structural studies by X-ray diffraction revealed that all multilayers have face centred cubic structure with preferred (1 1 0) crystal orientation as their substrates. The magnetic properties studied with the vibrating sample magnetometer showed that the magnetizations of the samples are significantly affected by the layer thicknesses. Saturation magnetisation, M-s increases from 45 to 225 emu/cm(3) with increasing NiFe layer thickness. The increase in the Ni content of the multilayers with a small Fe content causes an increase in the Ms. And, the coercivities ranging from 2 to 24 Oe are between the soft and hard magnetic properties. Also, the magnetic easy axis of the multilayers was found to be in the film plane. Magnetoresistance measurements showed that all multilayers exhibited the GMR behavior. The GMR magnitude increases with increasing Cu layer thickness and reaches its maximum value of 10% at the Cu layer thickness of 1 nm, then it decreases. And similarly, the GMR magnitude increases and reaches highest value of pure GMR (10%) for the NiFe layer thickness of 3 nm, and beyond this point GMR decreases with increasing NiFe layer thickness. Some small component of the anisotropic magnetoresistance was also observed at thin Cu and thick NiFe layer thicknesses. It is seen that the highest GMR values up to 10% were obtained in electrodeposited NiFe/Cu multilayers up to now. The structural, magnetic and magnetoresistance properties of the NiFe/Cu were reported via the variations of the thicknesses of Cu and NiFe layers with stressing the role of layer thicknesses on the high GMR behavior.
Description
Keywords
Materials science, Physics, GMR, Magnetisation, NiFe/Cu multilayers, Structural properties, Nı-CU/CU multilayers, Superlattices, Co, Alloys, Growth, Films, Binary alloys, Corrosion, Crystal orientation, Crystal structure, Electrodeposition, Electrodes, Galvanomagnetic effects, Iron alloys, Magnetic multilayers, Magnetic properties, Magnetism, Magnetization, Multilayers, Nickel, Structural properties, X ray diffraction, Face-centred cubic, Giant magnetoresistances (GMR), Hard magnetic property, Magnetic analysis, Magnetoresistance measurements, Magnetoresistance properties, Structural studies, Vibrating sample magnetometer, Giant magnetoresistance
Citation
Kuru, H. vd. (2017). ''Giant magnetoresistance (GMR) behavior of electrodeposited NiFe/Cu multilayers: Dependence of non-magnetic and magnetic layer thicknesses''. Journal of Magnetism and Magnetic Materials, 444, 132-139.