Kauçuk burçların çaplama işleminin modellenmesi ve ürün performansına etkisinin analizi

Thumbnail Image

Date

2019

Journal Title

Journal ISSN

Volume Title

Publisher

Bursa Uludağ Üniversitesi

Abstract

Bu çalışmada bir süspansiyon sisteminin titreşim sönümleme elemanı olan kauçuk metal malzeme çiftinden üretilen bir burçta çaplama işleminin ömür üzerine etkisi incelenmiştir. Çaplama işlemi ve statik katılık değişimlerinin tespitinde sonlu elemanlar analizi kullanılmıştır. Doğrusal olmayan hiperelastik modelinin hazırlanmasında ve sonuçların değerlendirilmesinde Msc. Patran yazılımı, analizin çözümleyicisi olarak ise Msc. Marc yazılımı kullanılmıştır. Doğrusal olmayan analizde kullanılan malzeme modelinin ve uygulanan metodun doğrulanması için üretilen prototipler, analiz ile aynı sınır koşullarında test edilmiştir. Önce radyal yönde test edilerek sonuçlar karşılaştırılmıştır. Son aşamada ise çaplamanın parça ömrü üzerine etkisinin incelenmesi amacıyla üretilen prototipler ömür testine tabi tutulmuşlardır. Sonuç olarak uygulanan çaplama değerinin ömür üzerinde göstermiş olduğu etki belirlenmiştir.
In this study, the influence of the calibration process on the life of a bushing which is used as a vibration damping element in suspensions was investigated. Finite element analysis is performed to determine the change of the static stiffness and calibration prosess. The Msc.Patran software is used in the preparation of the hiperelastic nonlinear analysis model and evaluation of the results, Msc.Marc software is used as a solver. The prototypes produced for verification of the material model and the applied method were tested at the same boundary conditions as the analysis. Firstly prototypes were tested in radial direction and the results are compared to the analysis results. At the last stage, prototypes which are produced for examination the effect of calibration on the part are used for durability test. As a result, the effect of the applied calibration on life is determined.

Description

Keywords

Kauçuk malzeme, Kauçuk burç, Titreşim, Hiperelastik, Çaplama, Ömür, Doğrusal olmayan sonlu elemanlar analizi, Rubber material, Rubber bushing, Vibration, Hyperelastic, Calibration, Durability, Nonlinear finite element analysis

Citation

Öncü, İ. C. (2019). Kauçuk burçların çaplama işleminin modellenmesi ve ürün performansına etkisinin analizi. Yayınlanmamış yüksek lisans tezi. Bursa Uludağ Üniversitesi Fen Bilimleri Enstitüsü.