Publication: The evaluation of the effects of control factors on surface roughness in the drilling of Waspaloy superalloy
Date
Authors
Kuş, Abdil
Authors
Motorcu, Ali Rıza
Durgun, İsmail
Advisor
Language
Type
Publisher:
Elsevier
Journal Title
Journal ISSN
Volume Title
Abstract
In this study, the effects of cutting tool type (Ct), cutting speed (Vc), feed rate (f) and drill bit angle (A) on the average surface roughness (Ra) were investigated in the drilling of Waspaloy superalloy with coated and uncoated solid carbide drills. Experimental studies were performed in the orthogonal array of L18 (2(1) x 3(3)) by using Taguchi method. A second order predictive equation was developed with Linear Regression Analysis and coefficient of correlation for Ra calculated as R-2 = 96.9%. The most effective parameters on Ra were determined as A, f, Vc and Ct with 49.44%, 15.0%, 14.45% and 13.47% contribution ratios, respectively. Ra surface roughness values increased with the increasing tool wear. In this study, the chip formation and tool wear were also evaluated. Three types chip formation such as spiral chip, string chip and short chip were observed in the drilling of Waspaloy with solid carbide drills.
Description
Source:
Keywords:
Keywords
Waspaloy, Drilling, Taguchi method (TM), Surface roughness, Tool wear, Hole quality, Process parameters, Stainless-steel, Chip formation, Tool wear, Machinability, Inconel-718, Performance, Alloys, Integrity, Engineering, Instruments & Instrumentation, Carbide cutting tools, Carbides, Drills, Regression analysis, Superalloys, Taguchi methods, Wear of materials, Average surface roughness, Coefficient of correlation, Contribution ratios, Effective parameters, Predictive equations, Tool wear, Waspaloy, Surface roughness
Citation
Motorcu, A. R. vd. (2014). "The evaluation of the effects of control factors on surface roughness in the drilling of Waspaloy superalloy". Measurement, 58, 394-408.