Publication:
In cylinder expansion of ring crevice and oil film hydrocarbons in SI engines

Placeholder

Organizational Units

Authors

Karamangil, Mehmet İhsan
Sürmen, Ali

Authors

Gül, Mehmet Zafer

Advisor

Language

Publisher:

Pergamon-Elsevier Science

Journal Title

Journal ISSN

Volume Title

Abstract

A computational approach has been presented for calculation of just-past-port hydrocarbons (HCs) released from ring crevices and oil film. Time dependent in cylinder gas concentrations are calculated based on the simplest combustion reaction assumption, i.e. complete theoretical combustion (lambda = 1), and a cosine law for the combustion rate. Until the time the HC release starts, the fresh charge, or its mixture with combustion products, is assumed to be distributed homogeneously in the combustion chamber so that the governing equations need not be solved for this period. After that, the governing equations have been introduced for solution of the flow field except that the energy equation is replaced with a simple zero-dimensional phenomenological submodel at the expense of solution of the N-S equations. Post flame oxidation is not taken into account. Results are compared to the extent limited counterparts in the literature allow, due to the lack of common parameters adopted in many of different studies.

Description

Source:

Keywords:

Keywords

Thermodynamics, Energy and fuels, Mechanics, Hydrocarbon emissions, Ring crevice, Oil film, Spark ignition engine, Combustion, Computational methods, Hydrocarbons, Mathematical models, Oxidation, Particulate emissions, Valves (mechanical), Internal combustion engines

Citation

Karamangil, M. İ. vd. (2004). “In cylinder expansion of ring crevice and oil film hydrocarbons in SI engines”. Energy Conversion and Management, 45(18-19), 3109-3126.

Endorsement

Review

Supplemented By

Referenced By

1

Views

0

Downloads