Yayın: Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state
Tarih
Kurum Yazarları
Aydın, Hakan
Bayram, Ali
Uguz, Agah
Akay, Sertan Kemal
Yazarlar
Danışman
Dil
Türü
Yayıncı:
Elsevier Science
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Özet
In this study, the different heat-treated-state 2024 Al-alloys were friction stir welded. The tensile properties of the joints have a tendency to increase with the precipitation hardening of the base material. The peak tensile properties have been obtained in the T6 (100 degrees C - 10 h) joint. It is observed that the weld zone is strengthened by the friction stir welding process for the 2024-0 joint. The fracture regions are detected near the nugget for W joint, the interface between the nugget and the thermomechanically affected zone for T4 and T6 joints and base material for O joint.
Açıklama
Kaynak:
Anahtar Kelimeler:
Konusu
Heat treatments, Welding, Mechanical, Mechanical-properties, Microstructural evolution, Aa2024, Al, Visualization, Flow, Te, Materials science, Alumina, Aluminum, Aluminum alloys, Friction, Heat treatment, Stainless steel, Tribology, Welded steel structures, Welding, Welds, 2024 aluminum alloys, Al-alloys, Base materials, C. Heat treatments, D. Welding, E. Mechanical, Friction stir welded joints, Friction stirs, Precipitation hardenings, Thermo-mechanically affected zones, Weld zones
Alıntı
Aydın, H. vd. (2009). "Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state". Materials & Design, 30(6), 2211-2221.