Publication:
The effect of loom settings on weavability limits on air-jet weaving machines

dc.contributor.authorTurhan, Yıldıray
dc.contributor.buuauthorEren, Recep
dc.contributor.departmentMühendislik Fakültesi
dc.contributor.departmentTekstil Mühendisliği Bölümü
dc.contributor.scopusid55999849700
dc.date.accessioned2022-05-24T10:24:48Z
dc.date.available2022-05-24T10:24:48Z
dc.date.issued2012-01
dc.description.abstractIn this paper, the effect of weaving machine settings on weavability limits of air-jet looms was investigated by weaving plain weave fabrics with polyester warp and weft yarns. For this purpose, firstly, weavability limits were determined for 16.7 tex weft by setting back-rest height, total warp tension, frontshed angle and shed closing time at different levels without changing the properties of warp. For each machine setting, weft density was increased gradually until reaching the weavable limit. During the experiments, weaving continuity, unfavorable effects interrupting this continuity, negative changes on fabric and yarns were observed. In the mean time, the warp yarn tension and cloth-fell distance were measured. Later, the weaving with 7.8 and 33.3 tex wefts was carried out at the settings required to produce a weave at the maximum weft density for 16.7 tex weft. The maximum weavable weft densities were determined for these two weft yarns. Finally, the obtained maximum weft densities and cover factors with three different weft yarns were compared with the results obtained from theoretical equations of Pierce, Love and Brierley. It was found that the warp tension had the most significant effect on the weavability limits. Changing shed adjustment from the zero level of the back rest to higher values, increased the weavability limit slightly, but increasing the shed asymmetry further did not have a significant effect on the weavability limit. The shed closing time had some effect on the limit. But this was less than the effect of the warp tension. Changing the front shed angle did not have any effect on weavability limits.
dc.identifier.citationTurhan, Y. ve Eren, R. (2012). "The effect of loom settings on weavability limits on air-jet weaving machines". Textile Research Journal, 82(2), 172-182.
dc.identifier.endpage182
dc.identifier.issn0040-5175
dc.identifier.issue2
dc.identifier.scopus2-s2.0-83455169764
dc.identifier.startpage172
dc.identifier.urihttps://doi.org/10.1177/0040517511424525
dc.identifier.urihttps://journals.sagepub.com/doi/10.1177/0040517511424525
dc.identifier.urihttp://hdl.handle.net/11452/26654
dc.identifier.volume82
dc.identifier.wos000298185200007
dc.indexed.wosSCIE
dc.language.isoen
dc.publisherSage Publications
dc.relation.collaborationYurt içi
dc.relation.journalTextile Research Journal
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectMaterials science
dc.subjectWeft setting
dc.subjectWarp setting
dc.subjectCover factor
dc.subjectWeaving machine settings
dc.subjectWeavability limit
dc.subjectCloth-fell
dc.subjectWarp tension
dc.subjectThickness variation
dc.subjectWoven fabrics
dc.subjectYarns
dc.subjectMechanics
dc.subjectFabrics
dc.subjectLooms
dc.subjectYarn
dc.subjectCloth-fell
dc.subjectCover factor
dc.subjectWarp tension
dc.subjectWeavability
dc.subjectWeaving
dc.subject.scopusAir-Jet Loom; Weft Insertion; Yarn Tension
dc.subject.wosMaterials science, textiles
dc.titleThe effect of loom settings on weavability limits on air-jet weaving machines
dc.typeArticle
dc.wos.quartileQ1
dspace.entity.typePublication
local.contributor.departmentMühendislik Fakültesi/Tekstil Mühendisliği Bölümü
local.indexed.atScopus
local.indexed.atWOS

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
Eren_Turhan_2012.pdf
Size:
453.2 KB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
Placeholder
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: