Publication:
Talaşlı imalatta dik kesme modelinin sonlu elemanlar metoduyla analizi

dc.contributor.advisorIşık, Yahya
dc.contributor.authorÖztürk, Ecenur
dc.contributor.departmentFen Bilimleri Enstitüsü
dc.contributor.departmentMakine Mühendisliği Ana Bilim Dalı
dc.contributor.orcid0000-0001-8681-8126
dc.date.accessioned2021-11-09T07:38:26Z
dc.date.available2021-11-09T07:38:26Z
dc.date.issued2021-10-20
dc.description.abstractBu çalışmada dik kesme işlemi incelenmiştir. Dik kesme işleminde kesme hızı, ilerleme miktarı ve talaş derinliği gibi kesme parametrelerinin kesme kuvveti üzerindeki etkisini deneysel olarak incelemek ve deneylerden elde edilen kesme kuvveti değerlerinin kesici takımda oluşturduğu Von-mises gerilmeleri ile toplam deformasyonu sonlu elemanlar metoduyla analiz etmek amaçlanmıştır. TiALN kaplamalı sert karbür kesici takım kullanılarak AISI 140 malzemeden üretilmiş iş parçasını, kesme işlemi gerçekleştirilmiştir. Kesme deneyleri sırasında talaş derinliği 1 mm’de sabit tutularak; kesme hızı 100 mm/dk, 150 mm/dk, 200 mm/dk ve ilerleme miktarı 0,1 mm/dev., 0,2 mm/dev., 0,3 mm/dev., 0,4 mm/dev., ve 0,5 mm/dev., olacak şekilde değiştirilmiştir. Kesme anında yatay eksende oluşan kesme kuvvetini ölçmek için Kistler 9333-A kuvvet sensörü kullanılmıştır. Ölçülen kuvvet değerleri Kistler-5877B0 yükselteç, veri okuma kartı ve VNC programı kullanılarak bilgisayara Newton olarak aktarılmıştır. Elde edilen kesme kuvveti değerlerinin kesme parametrelerine bağlı olarak değişimi grafikler yardımıyla analiz edilmiştir. Deneylerden elde edilen kesme kuvveti değerleri ANSYS yazılımı ile takımın üzerine etki ettirilerek, takım ucunda oluşan toplam deformasyon ve Von-mises gerilmeleri analiz edilmiştir. Elde edilen veriler sonucunda kesme kuvvetinin toplam deformasyon ve Von-mises gerilmesine etkisi açıklanmıştır. ilave olarak kesme hızı ve ilerleme miktarının da kesici takımda oluşan toplam deformasyon ve Von-mises gerilmesine etkileri analiz edilmiştir.
dc.description.abstractThe aim of this study is to give theoretical information about the orthogonal cutting method; to experimentally examine the effect of cutting parameters such as cutting velocity, feed rate and depth of cut on the cutting force and to analyze the Von-mises stresses and the total deformation created in the cutting tool by the finite element method by the cutting force values obtained from the experiments.Chip removal was carried out from the workpiece made of AISI 1040 material using a TiALN coated hard carbide cutting tool. During the cutting tests, the depth of cut was kept constant at 1 mm; cutting velocity was changed as 100 mm/min, 150 mm/min, 200 mm/min and feed rate as 0,1 mm/tooth, 0,2 mm/tooth, 0,3 mm/tooth, 0,4 mm/tooth and 0,5 mm/tooth. Kistler 9333-A force sensor was used to measure the cutting force on the horizontal axis during cutting. The measured force values were transferred to the computer in Newton by using the Kistler-5877B0 amplifier, data reading card and VNC program. The variation of the obtained cutting force values depending on the cutting parameters is explained with the help of graphics. The cutting force values obtained from the experiments were effected on the tool with the help of the ANSYS package program, and the total deformation and Von-mises stresses at the tip of the tool were analyzed. As a result of the obtained data, the effect of cutting force on total deformation and Von-mises stress is explained. In addition, how the cutting velocity and feed rate affect the total deformation and Vonmises stress in the cutting tool is interpreted.
dc.description.sponsorshipORAU Orhan Otomotiv Kont. Sis. San. A.Ş.
dc.format.extentVII, 58 sayfa
dc.identifier.citationÖztürk, E. (2021). Talaşlı imalatta dik kesme modelinin sonlu elemanlar metoduyla analizi. Yayınlanmamış yüksek lisans tezi. Bursa Uludağ Üniversitesi Fen Bilimleri Enstitüsü.
dc.identifier.urihttp://hdl.handle.net/11452/22596
dc.language.isotr
dc.publisherBursa Uludağ Üniversitesi
dc.relation.publicationcategoryTez
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectDik kesme
dc.subjectKesme kuvveti
dc.subjectKesme hızı
dc.subjectTalaş derinliği
dc.subjectİlerleme miktarı
dc.subjectANSYS
dc.subjectSonlu elemanlar metodu
dc.subjectOrthogonal cutting
dc.subjectCutting force
dc.subjectCutting speed
dc.subjectDepth of cut
dc.subjectFeed rate
dc.subjectFinite elements method
dc.titleTalaşlı imalatta dik kesme modelinin sonlu elemanlar metoduyla analizi
dc.title.alternativeAnalysis of the orthogonal cutting model by finite elements method in machining
dc.typemasterThesis
dspace.entity.typePublication
local.contributor.departmentFen Bilimleri Enstitüsü/Makine Mühendisliği Ana Bilim Dalı

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
Ecenur_OZTURK.pdf
Size:
1.54 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
Placeholder
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: