Publication:
Debriyajda kullanılan histerezis rondelası için yeni bir malzeme seçimi ve geometrisinin belirlenmesi

dc.contributor.advisorBayram, Ali
dc.contributor.authorSayaca, Seren
dc.contributor.departmentFen Bilimleri Enstitüsü
dc.contributor.departmentMakine Mühendisliği Ana Bilim Dalı
dc.date.accessioned2019-12-18T07:56:30Z
dc.date.available2019-12-18T07:56:30Z
dc.date.issued2008
dc.description.abstractBu çalışmada debriyajdaki H4 histerezis rondelasının sanayide üretimi esnasında karşılaşılan problemler incelenmiştir. H4 histerezis rondelasının sanayide üretimi esnasında parçanın kulak kısmında yırtılmalar ve belli bir kilometreden sonra parçada kırılmalar görülmektedir. H4 histerezis rondelası ile ilgili karşılaşılan problemleri çözmek amacıyla C15E malzemesi seçilmiştir. Parça geometrisinin yeniden belirlenmesi sonucunda parça iç çapı küçültülerek taşıyıcı kısmın kesit yüzeyi artırılmıştır. Seçilen malzeme ve parça geometrisi ANSYS programı ile doğrulanmıştır. Yapılan ön araştırmalarda üretim yöntemi olarak da bileşik kalıp yönteminin seçimine karar verilmiştir. Karbonitrürleme yüzey işlemi uygulamanın ve yağlayıcı kullanmanın da H4 histerezis rondelası ile ilgili sorunları çözmek için gerekli olduğu anlaşılmış ve uygulanmıştır. Yapılan iyileştirmeler sonucu bu parçaların kullanım esnasında karşılaşılan yırtılma ve benzeri problemler önemli ölçüde giderilmiştir.
dc.description.abstractIn this study problems which occur during the manufacturing of H4 hysteresis washer used in the clutch was analysed. Tear on the corner and breakage after certain kilometers are the problems that may be encountered in industrial manufacturing of H4 hysteresis washer. In the study C15E material was chosen in order to solve H4 hysteresis washer problems which occur during the manufacturing. As a result of redefining the geometry, the inner diameter of the component reduced so the cross section surface of the carrier part increased. The chosen material and feasible geometry were verified the results with ANSYS packet program. As a result of preliminary studies it is determined that compound die usage is suitable to produce H4 hysteresis washer. It is understood that application of carbonitruration as a surface treatment and lubricant usage were essential to solve manufacturing problems. As a result of improvement, tear and similar problems which occur on the usage of H4 hysteresis washer are solved.
dc.format.extent53 sayfa
dc.identifier.citationSayaca, S. (2008). Debriyajda kullanılan histerezis rondelası için yeni bir malzeme seçimi ve geometrisinin belirlenmesi. Yayınlanmamış yüksek lisans tezi. Uludağ Üniversitesi Fen Bilimleri Enstitüsü.
dc.identifier.urihttp://hdl.handle.net/11452/3495
dc.language.isotr
dc.publisherUludağ Üniversitesi
dc.relation.publicationcategoryTez
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectDebriyaj
dc.subjectH4 histerezis rondelası
dc.subjectANSYS
dc.subjectKarbonitrürleme
dc.subjectClutch
dc.subjectH4 hysteresis washer
dc.subjectCarbonitruration
dc.titleDebriyajda kullanılan histerezis rondelası için yeni bir malzeme seçimi ve geometrisinin belirlenmesi
dc.title.alternativeSelection of new material and determination of geometry for hysteresis washer which use in the clutches
dc.typemasterThesis
dspace.entity.typePublication
local.contributor.departmentFen Bilimleri Enstitüsü/Makine Mühendisliği Ana Bilim Dalı

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
255201.pdf
Size:
2.79 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
Placeholder
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: