Bilgisayar destekli torna tezgahı
Yükleniyor...
Dosyalar
Tarih
1988
Kurum Yazarları
Çelik, Sabri
Süreli Yayın başlığı
Süreli Yayın ISSN
Cilt Başlığı
Yayınevi
Uludağ Üniversitesi
Özet
Bu çalışmada Wolf Jahn firmasının ürettiği saatçi tornasının bilgisayar kontrollü tezgah haline getirilmesi incelenmiştir. Bu amaçla tezgahın kesici ağızının iki boyuttaki hareketi, bir mikroişlemci ile kontrol ettirilmiştir. Sistemde kullanılan mikroişlemci 8 bitlik 6510 çipidir. Kesici ağızın iki boyuttaki hareketini 1.8° adım aralığı olan step motorlar sağlamaktadır. Torna tezgahının bilgisayar aracılığı ile çalıştırılabilmesi için BASIC ve Makina dillerinde bir bilgisayar programı geliştirilmiştir.Bu programda kesici ağızın noktasal hareketi esas alınmıştır.
In the present work, the application of Computer Numeric Control to the miniature type lathe was studied. For this purpose, the movement of chuck in two directions was achieved using a microprocessor. The microprocessor used in the system was 8 bit 6510 type. Two stepper motors of 1.8° per step were employed for the movement of chuck. In order to control the stepper motors, a computer program was developed using BASIC and Machine Code languages.
In the present work, the application of Computer Numeric Control to the miniature type lathe was studied. For this purpose, the movement of chuck in two directions was achieved using a microprocessor. The microprocessor used in the system was 8 bit 6510 type. Two stepper motors of 1.8° per step were employed for the movement of chuck. In order to control the stepper motors, a computer program was developed using BASIC and Machine Code languages.
Açıklama
Anahtar kelimeler
Elektrik ve elektronik mühendisliği, Electrical and electronics engineering
Alıntı
Çelik, S. (1988). Bilgisayar destekli torna tezgahı. Yayınlanmamış yüksek lisans tezi. Uludağ Üniversitesi Fen Bilimleri Enstitüsü.