Hydro-abrasive erosion resistance of C45 steel in different heat-treated states on a designed wear test apparatus

dc.contributor.buuauthorYiğit, Kurtuluş
dc.contributor.buuauthorAydın, Hakan
dc.contributor.departmentUludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü.tr_TR
dc.contributor.scopusid56490995600tr_TR
dc.contributor.scopusid16312009400tr_TR
dc.date.accessioned2022-02-11T08:19:53Z
dc.date.available2022-02-11T08:19:53Z
dc.date.issued2010
dc.description.abstractIn this study, the hydro-abrasive erosion behaviour of a C 45 steel in different heat-treated states, which are normalizing, oil-quenching, tempering after oil-quenching and boronizing thermochemical surface treatment, was investigated on a designed and manufactured hydro-abrasive wear test apparatus. Boronizing was performed in a solid medium consisting of B4C, SiC, and KBF4 at a temperature of 900 degrees C for two hours. The microstructure and the wear regions of the specimens were characterized using an optical and a scanning electron microscope. In the tribogical system, the specimens were rotated in a system instead subjecting them to a fluid and moving abrasive particles. The wear tests were performed under a fixed rotational speed of 53 rpm for each specimen in the respective heat-treated state. The weight loss at the end of each wear period of 10 hours was measured using a precision electronic balance with an accuracy of 1 mg. It was concluded from the investigation that oil-quenching and tempering treatments led to significant improvement of the hydro-abrasive erosion resistance, while as-boronized and as-normalized specimens exhibited the lowest erosion resistance. In spite of its high surface hardness in the boronized state, the C 45 steel did not affect positively its hydro-abrasive erosion resistance. In the as-normalized specimen, the low hydro-abrasive erosion resistance corresponded with a decrease of hardness. An increasing amount of ferrite and pearlite in the C 45 steel led to the reduction of the hydro-abrasive erosion resistance.en_US
dc.identifier.citationYiğit, K. ve Aydın, H. (2010). "Hydro-abrasive erosion resistance of C45 steel in different heat-treated states on a designed wear test apparatus". Materials Testing, 52(5), 323-331.en_US
dc.identifier.endpage331tr_TR
dc.identifier.issn0025-5300
dc.identifier.issue5tr_TR
dc.identifier.scopus2-s2.0-77952336578tr_TR
dc.identifier.startpage323tr_TR
dc.identifier.urihttps://doi.org/10.3139/120.110129
dc.identifier.urihttps://www.degruyter.com/document/doi/10.3139/120.110129/html
dc.identifier.urihttp://hdl.handle.net/11452/24413
dc.identifier.volume52tr_TR
dc.identifier.wos000277918700006tr_TR
dc.indexed.scopusScopusen_US
dc.indexed.wosSCIEen_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter GMBHde
dc.relation.journalMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergitr_TR
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBehavioren_US
dc.subjectCarbonen_US
dc.subjectPredictionen_US
dc.subjectMaterials scienceen_US
dc.subjectAbrasivesen_US
dc.subjectElectronic scalesen_US
dc.subjectErosionen_US
dc.subjectHardnessen_US
dc.subjectQuenchingen_US
dc.subjectScanning electron microscopyen_US
dc.subjectSilicon carbideen_US
dc.subjectSurface treatmenten_US
dc.subjectTemperingen_US
dc.subjectAbrasive erosionen_US
dc.subjectAbrasive particlesen_US
dc.subjectElectronic balancesen_US
dc.subjectErosion resistanceen_US
dc.subjectOil quenchingen_US
dc.subjectRotational speeden_US
dc.subjectSurface hardnessen_US
dc.subjectThermochemical surface treatmenten_US
dc.subjectHeat resistanceen_US
dc.subject.scopusBoriding; Chromium Borides; Nimonic Alloysen_US
dc.subject.wosMaterials science, characterization & testingen_US
dc.titleHydro-abrasive erosion resistance of C45 steel in different heat-treated states on a designed wear test apparatusen_US
dc.typeArticle
dc.wos.quartileQ4en_US

Files

License bundle
Now showing 1 - 1 of 1
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: