Effects of microstructure on machinability of ductile iron

Simple item page
dc.contributor.buuauthorÇakır, Mustafa Cemal
dc.contributor.buuauthorBayram, Ali
dc.contributor.buuauthorKırcalı, K. Kaan
dc.contributor.buuauthorEnsarioğlu, Cihat
dc.contributor.departmentUludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü.tr_TR
dc.contributor.scopusid14044730900tr_TR
dc.contributor.scopusid7004197848tr_TR
dc.contributor.scopusid41762084700tr_TR
dc.contributor.scopusid23972265100tr_TR
dc.date.accessioned2022-01-10T10:39:14Z
dc.date.available2022-01-10T10:39:14Z
dc.date.issued2011
dc.description.abstractIn this paper, ductile irons with different microstructures were machined in a group of experiments using standard testing procedure and the effect of microstructure on the machinability was investigated. Bars (diameter 90 mm x 320 mm) of ferritic/pearlitic, tempered martensitic, and lower ausferritic microstructures were produced by various heat treatments and then tested to evaluate their machinability. Five groups of ductile iron specimens with various microstructures were tested following ISO 3685: 1993 (E) standard. Specimens were subjected to dry cutting; cutting force, flank wear width, and surface roughness were measured to compare the machining performances. In addition, further turning tests were conducted on the specimens of austempered microstructure at various feed rates (while keeping the cutting speed and depth of cut constant), and both surface roughness and cutting force values were recorded. The influence of feed rate on the machinability of austempered ductile iron was investigated and a correlation between feed rate and machinability, in terms of cutting force and surface roughness, was established. Not only the tangential cutting force component but also the feed force component was taken into consideration in these tests.en_US
dc.identifier.citationÇakır, M. C. vd. (2011). "Effects of microstructure on machinability of ductile iron". Proceedings of the Institution of Mechanical Engineers, Part B-Journal of Engineering Manufacture, 225(B2), 297-304.en_US
dc.identifier.endpage304tr_TR
dc.identifier.issn0954-4054
dc.identifier.issn2041-1975
dc.identifier.issueB2tr_TR
dc.identifier.scopus2-s2.0-79958715146tr_TR
dc.identifier.startpage297tr_TR
dc.identifier.urihttps://doi.org/10.1177/2041297510394101
dc.identifier.urihttps://journals.sagepub.com/doi/10.1177/2041297510394101
dc.identifier.urihttp://hdl.handle.net/11452/23966
dc.identifier.volume225tr_TR
dc.identifier.wos000287964300012tr_TR
dc.indexed.scopusScopusen_US
dc.indexed.wosSCIEen_US
dc.language.isoenen_US
dc.publisherSage Publicationsen_US
dc.relation.journalProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufactureen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergitr_TR
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectEngineeringen_US
dc.subjectDuctile ironsen_US
dc.subjectMicrostructuresen_US
dc.subjectMachinabilityen_US
dc.subjectTool lifeen_US
dc.subjectCast-ironen_US
dc.subjectMechanical-propertiesen_US
dc.subjectFracture-toughnessen_US
dc.subjectMatrix structureen_US
dc.subjectWear-resistanceen_US
dc.subjectCutting forcesen_US
dc.subjectBehavioren_US
dc.subjectFatigueen_US
dc.subjectTimeen_US
dc.subjectADIen_US
dc.subjectDuctilityen_US
dc.subjectIronen_US
dc.subjectNodular ironen_US
dc.subjectStainless steelen_US
dc.subjectSurface propertiesen_US
dc.subjectSurface roughnessen_US
dc.subjectAustempered ductile ironsen_US
dc.subjectCutting forcesen_US
dc.subjectCutting speeden_US
dc.subjectDepth of cuten_US
dc.subjectDry cuttingen_US
dc.subjectFeed forcesen_US
dc.subjectFeed-ratesen_US
dc.subjectFlank wearen_US
dc.subjectMachining performanceen_US
dc.subjectStandard testingen_US
dc.subjectTangential cutting forceen_US
dc.subjectTool lifeen_US
dc.subjectTurning testen_US
dc.subjectMicrostructureen_US
dc.subject.scopusNodular Iron; Machinability; Wear Testsen_US
dc.subject.wosEngineering, manufacturingen_US
dc.subject.wosEngineering, mechanicalen_US
dc.titleEffects of microstructure on machinability of ductile ironen_US
dc.typeArticle

Files

License bundle
Now showing 1 - 1 of 1
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Web of Science
Scopus