Browsing by Author "Ufat, Hande"
Now showing 1 - 3 of 3
- Results Per Page
- Sort Options
Item Ameliyathane odasının ısıl konfor ve hijyenik şartlarının deneysel ve nümerik incelenmesi(Uludağ Üniversitesi, 2017-05-15) Ufat, Hande; Yamankaradeniz, Recep; Uludağ Üniversitesi/Fen Bilimleri Enstitüsü/Makine Mühendisliği Anabilim Dalı.Ameliyathane iklimlendirme sistemleri hem ameliyathane ekibinin ısıl konforunu sağlamak hem de ortamın hijyenini sağlayabilmek açısından oldukça önemlidir. Yapılan birçok çalışmada ameliyat enfeksiyonlarının büyük kısmının, ameliyathane iklimlendirme sistemine bağlı olduğu görülmüştür. Isıl konfor, önemli derecede hava sıcaklığına, bağıl neme ve hava hızına bağlıdır. Mahalin hijyenini sağlamak için de ortamdaki partikül miktarını en aza indirmek gerekmektedir. Bunu en çok etkileyen faktörler ise havanın filtrasyonu ve havanın mahale dağıtım şeklidir. Yapılan bu çalışmada, türbülanslı ve laminer hava akışlı iki adet ameliyathanede deneyler yapılarak, farklı hava giriş sıcaklıkları ve hızlarında odanın bağıl nem ölçümü, sıcaklığı ve ameliyat masası üzerinden partikül sayımı yapılmıştır. Hava giriş hızının ve sıcaklığının mahal hijyenini ne derecede etkilediğine bakılmıştır. Bu iki ameliyathane ANSYS-Fluent programında modellenerek, yapılan deneylerle analiz sonuçları karşılaştırılmıştır.Item Investigation of the number of particles in an operating room at different ambient temperatures and inlet velocities(Taylor & Francis, 2017-10-11) Ufat, Hande; Kaynaklı, Ömer; Yamankaradeniz, Nurettin; Yamankaradeniz, Recep; Uludağ Üniversitesi/Mühendislik Mimarlık Fakültesi/Makine Mühendisliği Bölümü.; AAA-1753-2021; AAK-4166-2021; 8387145900; 57195235906; 26645227400; 6507733785This study presents some field measurements in an operating room of air velocity, ambient temperature and particle counts on the operating table. Moreover, computational fluid Dynamics analyses of the operating room were performed and compared with the measurements. Measurements were taken under the preferred operating conditions by surgical staff (at 19 degrees C) and then at different ambient temperatures (from 20 to 22 degrees C, varying by one-degree increments) and average inlet air velocities (V-j) (0.1 and 0.2 m/s). The preferred one by surgical staff is 0.1 m/s and the maximum that can be reached is 0.2 m/s, with the current system. The results show that the particle count decreased at V-j of 0.2 m/s and low temperatures.Item Three-dimensional air distribution analysis of different outflow typed operating rooms at different inlet velocities and room temperatures(Sage Puplications, 2017-04-06) Ufat, Hande; Kaynaklı, Ömer; Yamankaradeniz, Nurettin; Yamankaradeniz, Recep; Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü.; AAA-1753-2021; AAK-4166-2021; 57195235906; 8387145900; 26645227400; 6507733785It is important to provide a regular unidirectional air distribution in an operating room to reduce the number of particles. Measurements were taken in the one of the operating rooms at Uludag University Medical School, with laminar air flow unit and two-cornered outlet which was thought to have some airflow problems. Moreover, a three-dimensional computational fluid dynamics model has been developed where the measurements were taken in. The distributions of air velocity, temperature, and relative humidity have been examined and compared with the measurements to validate the computational fluid dynamics analyses. In addition to present model, four-cornered outlet operating room has been analyzed and compared with the results of two-cornered one. It is concluded that the case of four-cornered outlet provides more suitable thermal distribution, which results in a reduction of the particle numbers in the interior. Although there is no significant change in temperature and relative humidity in the operating room, air distribution changes dramatically.