Isı pompası destekli kurutma sistemlerinde by-pass oranının kurutma performansına etkisinin deneysel analizi

dc.contributor.buuauthorYamankaradeniz, Nurettin
dc.contributor.buuauthorCoşkun, Salih
dc.contributor.buuauthorPastakkaya, Bilsay
dc.contributor.buuauthorCan, Muhiddin
dc.contributor.departmentUludağ Üniversitesi/Teknik Bilimler Meslek Yüksek Okulu/İklimlendirme Soğutma Programı.tr_TR
dc.contributor.departmentUludağ Üniversitesi/Orhangazi Meslek Yüksek Okulu/Makine Programı.tr_TR
dc.contributor.departmentUludağ Üniversitesi/Mühendislik Mimarlık Fakültesi/Makine Mühendisliği Bölümü.tr_TR
dc.date.accessioned2020-08-10T07:39:42Z
dc.date.available2020-08-10T07:39:42Z
dc.date.issued2012-06-27
dc.description.abstractBu çalışmada R134a soğutucu akışkan kullanılan prototip bir kapalı sistem ısı pompası destekli kurutucu deney düzeneği tasarlandı ve test edildi. İki farklı hız için by-pass oranının sistem performansına etkisi incelendi. Sistem performansına etki eden parametreler, ısı pompası ısıtma tesir katsayısı (ITKıp), tüm sistemin ısıtma tesir katsayısı (ITKsis) ve özgül nem çekme oranı (SMER) hesaplandı. Deneysel sonuçlarda, by-pass oranı % 50’den fazla olduğu durumlarda ITK ve SMER değerlerinin azaldığı görüldü. ITK ve SMER değerleri yaklaşık % 50 by-pass oranına kadar arttığı ve daha sonra hızla azaldığı görüldü. Maksimum ITKıp, ITKsis, SMER değerleri yaklaşık olarak 4.8, 3.2 ve 3.5 kg/kWh olarak elde edildi. Ayrıca hava debisinin arttırılmasının sistem performansını iyileştirmediği gözlemlendi. Çünkü yüksek hava debilerinde fanın tükettiği güç değeri de fazla olduğundan dolayı ITKsis değeri olumsuz yönde etkilendi.tr_TR
dc.description.abstractIn this study, a prototype, closed loop heat pump-assisted dryer (HPD) system with the refrigerant R134a was designed, and tested. The effects of by-pass air ratio (BAR) for two different air flow rates on the system’s performance were investigated. The system performances were evaluated in terms of the heat pump performance (COPhp), the performance of all systems (COPsys) and specific moisture extraction rate (SMER). The experimental results showed that bypassing the air more than 50% reduced the COP and SMER values. The COP and SMER values remained nearly constant up to the BAR of 50% and then sharply decreased. The maximum COPhp, COPsys and SMER values were obtained as 4.8, 3.2 and 3.5 kg/kWh, respectively. It was also observed that increasing the air flow rate did not improve the performance of the system. Because, the consumption of the fan was also high, so ITKsis affected negatively.en_US
dc.identifier.citationYamankaradeniz, N. vd. (2012). "Isı pompası destekli kurutma sistemlerinde by-pass oranının kurutma performansına etkisinin deneysel analizi". Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 17(2), 17-35.tr_TR
dc.identifier.endpage35tr_TR
dc.identifier.issn2148-4147
dc.identifier.issn2148-4155
dc.identifier.issue2tr_TR
dc.identifier.startpage17tr_TR
dc.identifier.urihttps://dergipark.org.tr/tr/download/article-file/202642
dc.identifier.urihttp://hdl.handle.net/11452/12029
dc.identifier.volume17tr_TR
dc.language.isotrtr_TR
dc.publisherUludağ Üniversitesitr_TR
dc.relation.journalUludağ Üniversitesi Mühendislik Dergisi / Uludağ University Journal of The Faculty of Engineeringtr_TR
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergitr_TR
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectKurutucutr_TR
dc.subjectKurutmatr_TR
dc.subjectIsı pompasıtr_TR
dc.subjectIsı pompası destekli kurutucutr_TR
dc.subjectDryertr_TR
dc.subjectDryingen_US
dc.subjectHeat pumpen_US
dc.subjectHeat pump-assisted dryeren_US
dc.titleIsı pompası destekli kurutma sistemlerinde by-pass oranının kurutma performansına etkisinin deneysel analizitr_TR
dc.title.alternativeExperimental analysis of the by-pass air ratio effect on the drying performance at the heat pump assisted dryer systemsen_US
dc.typeArticleen_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
17_2_2.pdf
Size:
450.42 KB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: