Yapay zeka yöntemleri kullanılarak dokuma makinelerinde çözgü besleme sistemi tasarımı

Thumbnail Image

Date

2010-11-11

Journal Title

Journal ISSN

Volume Title

Publisher

Uludağ Üniversitesi

Abstract

Bu çalışmada dokuma makinesine ait çözgü salma sisteminin teorik modellenmesi yapılmıştır. Teorik modelden yararlanılarak tüm dokuma işlemi boyunca meydana gelen çözgü gerginliğindeki değişim incelenmiştir. Çözgü gerginliği çözgü salma miktarına, kumaş çekme miktarına ve arka köprünün hareketine bağlı olarak farklı değişimler göstermektedir. Çözgü gerginliğinin istenilen değerde sabit tutabilmek için PID denetim sistemi ve Bulanık Mantık kontrol denetçisi kullanılmıştır. PID denetim sisteminde farklı oransal, türev ve integral değerleri kullanılarak çözgü gerginliğinin değişimi incelenmiştir. Bulanık mantık kontrolcüsünde ise istenilen gerginlik değerine ulaşabilmek için kural tablosu oluşturulmuştur. Yapılan simülasyon çalışmasıyla bulanık mantık kontrolcüsüyle yapılan gerginlik değişiminin PID denetim sistemiyle yapılan kontrole göre önemli avantajlar sağladığı gözlemlenmiştir.
In this thesis, theoritical modelling of the let off system in loom has been done. Throughout the entire weaving process, change occurring in the warp tension investigated by using the theoretical model. Warp tension, depending on the back rail ossicilations and let off and take up amount, shows the different variations. Desired to keep the value of warp tension PID and fuzzy logic controller was used. PID control system, different proportional, derivative and integral values of the exchange were examined using warp tension. The rule table of fuzzy logic controller in order to achieve the desired tension value was created. Fuzzy logic controller with a simulation study made of the PID control system built with the tensions of change compared to control important advantages that have been observed.

Description

Keywords

Çözgü gerginliği, Bulanık mantık, PID kontrol, Warp tension, Fuzzy logic control, PID control

Citation

Dağkurs, L. (2010). Yapay zeka yöntemleri kullanılarak dokuma makinelerinde çözgü besleme sistemi tasarımı. Yayınlanmamış doktora tezi. Uludağ Üniversitesi Fen Bilimleri Enstitüsü.