2022-10-312022-10-312007-05-15Becerir, B. vd. (2007). "Assessing colour values of polyester fabrics produced from fibres having different cross-sectional shapes after abrasion". Coloration Technology, 123(4), 252-259.1478-44081472-3581https://doi.org/10.1111/j.1478-4408.2007.00092.xhttps://onlinelibrary.wiley.com/doi/10.1111/j.1478-4408.2007.00092.xhttp://hdl.handle.net/11452/29270This study assesses the colour, colour difference and colour strength values obtained for eight disperse-dyed polyester fabric samples produced from full and hollow round and trilobal fibres after four sets of abrasion cycle. Each fabric was produced from the same yarns in warp and weft directions. The L*, C* Delta E-ab(*) and K/S values of the undyed fabrics and dyed fabrics before and after increasing cycles of abrasion are presented and discussed. Fabrics produced from full and hollow fibres showed great differences regarding colour values in abrasion behaviour. Fabrics produced from hollow fibres were found to be very sensitive to increasing abrasion cycles.eninfo:eu-repo/semantics/closedAccessColor matchingAbrasionColour strengthPolyestersChemistryEngineeringMaterials scienceDisperse-dyed polyester fabricHollow fibresTrilobal fibresColorDisperse dyeDyed fabricPolyester fabricStrengthWarpWeftYarnDyesFabricsOpen endHollowPerformanceStrengthYarnsArticle0002485394000082-s2.0-345471281272522591234Chemistry, appliedEngineering, chemicalMaterials science, textilesWeft; Yarn Count; Woven Fabrics