Atomik katman biriktirme (ALD) ile cam kumaş yüzeyinde oluşturulan al katkılı metal oksit ince filmlerin fotokatalitik aktivitesi

Loading...
Thumbnail Image

Date

2022

Authors

Özkan, Sena

Journal Title

Journal ISSN

Volume Title

Publisher

Bursa Uludağ Üniversitesi

Abstract

Bu çalışmada ALD yöntemini kullanılarak yüksek yüzey alanına sahip alttaş malzemede farklı kompozisyonlara sahip AZO ve ATO filmler oluşturarak, farklı katkı oranlarının ve tavlamanın fotokatalitik aktivite üzerindeki etkinlikleri belirlenmiştir. Filmlerin karakterizasyon ve fotokatalitik aktivite çalışmalarında kullanılmak üzere dört farklı alttaş (Si Wafer, Kuartz, Cam Lamel ve Cam kumaş) malzemesi kullanılmıştır. Tavlama işleminin üretilen filmin yapısı ve performansı üzerindeki etkisini belirlemek amacıyla her alttaştan iki adet üretim gerçekleştirilerek birine 450 °C’de tavlama işlemi uygulanmıştır. Al katkısının ZnO ve TiO2 ALD filmlerin fotokatalitik aktivitesi üzerindeki etkisini değerlendirmek amacıyla %0, %5, %10 ve %20 olmak üzere dört farklı katkı oranı ile film üretimi yapılmıştır. Fotokatalitik aktivitenin belirlenmesi için dört saat boyunca metilen mavisi boyar maddesinin solar simülatör altında bozulmasının ölçümü yaklaşımı tercih edilmiştir. AZO ve ATO ALD ince filmlerin morfolojisinin incelenmesi amacıyla FESEM analizleri, kristal yapısının incelenmesi amacıyla XRD ve XPS analizleri, optik özelliklerinin belirlenmesi amacıyla UV-Vis ve PL analizleri gerçekleştirilmiştir. Üretilen filmler arasında tavlanmış %20 Al katkılı ZnO filmler (%20 AZO) en yüksek fotokatalitik aktiviteyi göstermiş, hemen ardından sadece ZnO (%0 AZO) kaplı filmler gelmiştir. %5 ve %10 Al katkılı ZnO filmler ise daha zayıf fotokatalitik etkinlik göstermiştir. Bu durum katkı oranının belirli bir değerin üzerine çıktıktan sonra AZO filmin bant yapısında değişimlere sebep olduğunu göstermektedir. ATO filmler içerisinde en yüksek fotokatalitik aktiviteyi tavlanmış olan yalnızca TiO2 kaplı film göstermiştir ve AlO2 katkısının TiO2 filmlerin fotokatalitik aktivitesi üzerinde pozitif etkisinin olmadığı tespit edilmiştir.
In this study, AZO and ATO films with different compositions were formed on the substrate material with high surface area by using the ALD method and the effects of different doped ratios and annealing on the photocatalytic activity were determined. Four different substrate materials (Si Wafer, Quartz, Cover Glass and Glass fabric) were used for the characterization and photocatalytic activity studies of the films. In order to determine the effect of the annealing process on the structure and performance of the produced film, two productions were made from each substrate and annealing was applied to one of them at 450 °C. In order to evaluate the effect of Al doped on the photocatalytic activity of ZnO and TiO2 ALD films, films were produced with four different doped ratios as 0%, 5%, 10% and 20%. In order to determine the photocatalytic activity, the approach of measuring the degradation of the methylene blue dyestuff under a solar simulator for four hours was preferred. The morphology of the AZO and ATO ALD thin films were analyzed with FESEM, XRD and XPS analyzes were performed to examine the crystal structure of the films, and UV-Vis and PL analyzes were performed to determine optical properties of the produced films. Among the produced films, the annealed 20% Al doped ZnO films showed the highest photocatalytic efficiency, only ZnO (0% AZO) coated films came right after that. 5% and 10% Al doped ZnO films showed weaker photocatalytic activity. This shows that after the doped ratio exceeds a certain value, it causes changes in the band structure of the AZO film. Only (annealed) TiO2 coated films showed the highest photocatalytic activity among ATO films. It was also determined that the doped of AlO2 did not have a positive effect on the photocatalytic activity of TiO2 films.

Description

Keywords

ALD (Atomik katman biriktirme), Al katkılı ZnO (AZO), Fotokatalitik aktivite, Al katkılı TiO2 (ATO), ALD (Atomic Layer Deposition), Al-doped ZnO (AZO), Photocatalytic activity, Al-doped TiO2 (ATO)

Citation

Özkan, S. (2022). Atomik katman biriktirme (ALD) ile cam kumaş yüzeyinde oluşturulan al katkılı metal oksit ince filmlerin fotokatalitik aktivitesi. Yayınlanmamış yüksek lisans tezi. Bursa Uludağ Üniversitesi Fen Bilimleri Enstitüsü.