Taşıtlarda yüksek mukavemetli düşük alaşımlı (HSLA) çelik ön çarpışma kolları için en uygun et kalınlığının belirlenmesi

Loading...
Thumbnail Image

Date

2019-05-29

Authors

Journal Title

Journal ISSN

Volume Title

Publisher

Bursa Uludağ Üniversitesi

Abstract

Bu çalışmada, rijit duvar testi sanal ortamda simule edilerek yüksek mukavemetli düşük alaşımlı çelik ön çarpışma kolu et kalınlığının aracın çarpışma performansına etkisi incelenmiş ve en uygun et kalınlığı tespit edilmiştir. Ön çarpışma kollarında HSLA (High-Strength Low-Alloy) çelik grubundaki FEE340 malzemesi kullanılmış ve altı farklı et kalınlığının aracın çarpışma performansına etkileri karşılaştırılmıştır. Simülasyonlarda çarpışma kolu, çarpışma kutusu ve ön tampon (destek) traversinden oluşan yarım araç modeli kullanılmıştır. Farklı kalınlığa sahip ön çarpışma kollarının çarpışma analizleri Abaqus sonlu elemanlar yazılımı ile gerçekleştirilmiştir. Simülasyonlardan, toplam deplasman, çarpışma kuvveti verimliliği (CFE), yolcu kabinine iletilen kuvvet miktarı ve her bir çarpışma elemanı tarafından sönümlenen enerji miktarı sonuçları elde edilmiştir. Simülasyonda kullanılan taşıt modeli için, yolcu kabinine iletilen kuvvet, ivme ve deplasman miktarları değerlendirildiğinde HSLA çelik ön çarpışma kolu için en uygun et kalınlığının 2 mm olduğu görülmüştür.
In this study, the rigid wall test was simulated in a virtual environment and the effect of high strength low alloy steel front collision rail wall thickness on the crash performance of a vehicle was investigated and the best wall thickness was determined for the front collision rails. The FEE340 material in the HSLA (High-Strength Low-Alloy) steel group was used in the front collision rails and the effects of the six different material wall thicknesses used in the front collision rails were compared with regard to the crash performance of the vehicle. The crash analyses of the frontal collision rails with various thicknesses were performed by the Abaqus finite element software. Total displacement, crush force efficiency (CFE), the amount of force delivered to the passenger compartment and the amount of energy damped by each collision member results were acquired from the simulations. For the vehicle model used in the simulations, when the amounts of force delivered to the passenger life cage, acceleration and displacement were evaluated, it was seen that the best wall thickness for the HSLA steel front collision rail was 2 mm.

Description

Keywords

Çarpışma analizi, Sonlu elemanlar, Ön çarpışma kolu, HSLA, Et kalınlığı, Crash analysis, Finite element method, Front collision rail, Wall thickness

Citation

Bilbay, F. B. vd. (2019). "Taşıtlarda yüksek mukavemetli düşük alaşımlı (HSLA) çelik ön çarpışma kolları için en uygun et kalınlığının belirlenmesi". Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2), 461-476.